Sounds Good to Me in Tempe, AZ, near Phoenix, are car amplifier vehicle installation specialists and authorized dealers of Alpine stereo amps; including pdx series, v-power series amplifiers.
PDX SERIES AMPS
PDX-F6
CEA 2006 Power Rating: (4/2 I?@14.4V Ƈ%THD+N),
S/N 96dBA (Ref. 1W into 4 I?): 150W x 4
RMS Power Ratings
Per channel into 4 Ohms: (@14.4V Ƈ%THD+N) 150W x 4
Per channel into 2 Ohms: (@14.4V Ƈ%THD+N) 150W x 4
Bridged 4 Ohms: Bridged 4 I?: 300W x 2 (Ƈ% THD+N)
Sound Tuning
Crossover: Variable, 30-400Hz (-12dB / oct ),
Low-Pass/High-Pass/OFF Selectable
Dimensions
Heat Sink (WxHxD) mm: 257mm x 192mm x 50.8mm
Heat Sink (WxHxD) in: 10-1/8” x 7-9/16” x 2”
General Power Requirements: 14.4V DC (11V to 16V)
Input Sensitivity: 0.2V to 4.0V (For Rated Power)
Cable size: 4 AWG (BATT and GND),
12 AWG (Remote), Up to 8 AWG (Speaker)
Frequency Response: 5 Hz – 100 kHz / 0 dB ~ -3dB (Reference: 1 W into 4 ohms)
Speaker Impedance: 4 or 2 I?
Signal to Noise: CEA 2006 S/N Ratio (IHF A Weighted,
Reference: 1W into 4I?) 96 dBA
PDX-M12
CEA-2006 Power Ratings
CEA-2006 Power Rating: (4/2 I? @14.4V Ƈ%THD+N),
S/N 92dBA, ref:1W into 4 I?) 1200W x 1
RMS Power Ratings
Per channel into 4 Ohms: (@14.4V Ƈ%THD+N) 1200W x 1
Per channel into 2 Ohms: (@14.4V Ƈ%THD+N) 1200W x 1
Sound Tuning
Crossover: Variable, 50Hz – 400Hz (-24dB / oct),
(Variable, L.P.F Only 1/2 ch)
Subsonic Filter: OFF / 15Hz / 30Hz
Dimensions
Heat Sink (WxHxD) mm: 257mm x 192mm x 50.8mm
Heat Sink (WxHxD) in: 10-1/8” x 7-9/16” x 2”
PDX-M6
CEA-2006 Power Ratings
CEA-2006 Power Rating: (4/2 I? @14.4V Ƈ% THD+N),
S/N: 95dBA, ref:1W into 4 I?) 600W x 1
RMS Power Ratings
Per channel into 4 Ohms: (@ 14.4V Ƈ%THD+N) 600W x 1
Per channel into 2 Ohms: (@ 14.4V Ƈ%THD+N) 600W x 1
Sound Tuning
Crossover: Variable, 50Hz – 400Hz (-24dB / oct),
(Variable, L.P.F Only, 1/2 ch)
Subsonic Filter: OFF / 15Hz / 30Hz
Dimensions
Heat Sink (WxHxD) mm: 257mm x 192mm x 50.8mm
Heat Sink (WxHxD) in: 10-1/8” x 7-9/16” x 2”
PDX-F4
CEA-2006 Power Ratings
CEA-2006 Power Rating: (4/2 I?@14.4V Ƈ%THD+N),
S/N 98dBA (Ref. 1W into 4 I?): 100w x 4
RMS Power Ratings
Per channel into 4 Ohms: (@14.4V Ƈ%THD+N) 100W x 4
Per channel into 2 Ohms: (@14.4V Ƈ%THD+N) 100W x 4
Bridged 4 Ohms: Bridged into 4I? (Ƈ%THD+N) 200W x 2
Sound Tuning
Crossover: Variable,
30-400Hz (-12dB / oct ),
Low-Pass/High-Pass /OFF Selectable
PDX-5
CEA-2006 Power Rating: (4 I? @14.4V Ƈ% THD+N,
S/N: 77dBA, ref:1W into 4 I? and 2I? for mono ch.) 75W x 4 + 300W x 1
RMS Power Ratings
Per channel into 4 Ohms: (@ 14.4V Ƈ%THD+N, 20Hz – 20kHz @ 4I?
for 4ch.) 75W x 4
Per channel into 2 Ohms: (@ 14.4V Ƈ%THD+N, 20Hz – 200Hz @ 2I?
for Mono ch.) 300W x 1
Sound Tuning
Crossover: 30Hz-400Hz, -12dB/oct. (Low-Pass/High-Pass for 4CH),
20Hz-200Hz, -24dB/oct. (Low-Pass for Mono)
Subsonic Filter: 15Hz (Fixed), -24dB/oct. for Mono
V-POWER SERIES AMPS
MRP-M2000
CEA-2006 Power Rating: (2 I? @14.4V Ƈ% THD+N),
S/N: 75dBA, ref:1W into 4
I?) 2000Wx1
RMS Power Ratings
Per channel into 4 Ohms: (@ 14.4V Ƈ%THD+N, 20Hz – 200Hz) 1500Wx1
Per channel into 2 Ohms: (@ 14.4V Ƈ%THD+N, 20Hz – 200Hz) 2000Wx1
Sound Tuning
Crossover: 50-200Hz
EQ (Equalizer): Center Frequency Adjustment 30-80Hz,
Gain 0-12dB
Subsonic Filter: 0, 15, 30Hz
MRP-M500
CEA-2006 Power Rating:
(4 I? @14.4V Ƈ% THD+N, S/N: 75dBA, ref:1W into 4 I?) 300W x 1
RMS Power Ratings
Per channel into 4 Ohms: (@ 14.4V Ƈ%THD+N, 20Hz – 200Hz) 300W x 1
Per channel into 2 Ohms: (@ 14.4V Ƈ%THD+N, 20Hz – 200Hz) 500W x 1
Sound Tuning
Crossover: 50Hz-200Hz, -24dB/oct. (Low-Pass)
EQ (Equalizer): Bass EQ (Fixed Frequency): 50Hz 0 to +12dB
Subsonic Filter: 15Hz (Fixed), -24dB/oct.
MRP-F300
4/3/2 Channel Power Amplifier Overview Specification Features
and Specification
CEA-2006 Power Ratings
CEA-2006 Power Rating:
(4 I? @14.4V Ƈ% THD+N, S/N: 80dBA, ref:1W into 50W x 4
RMS Power Ratings
Per channel into 4 Ohms: (@ 14.4V Ƈ%THD+N, 20Hz – 20kHz) 50W x 4
Per channel into 2 Ohms: (@ 14.4V Ƈ%THD+N, 20Hz – 20kHz) 75W x 4
Bridged 4 Ohms: (@ 14.4V Ƈ%THD+N, 20Hz – 20kHz) 150W x 2
Sound Tuning
Crossover: 50Hz-400Hz, -12dB/oct. (Low-Pass/High-Pass)
EQ (Equalizer): Bass EQ (Fixed Frequency): 50Hz +12dB
Subsonic Filter: 15Hz (Fixed), -18dB/oct.
KTP-445
Upgrade Your Head Unit. Add higher output and more dynamic response with this easy-to-install head unit power upgrade. The KTP-445 amplifies the head unit power output,resulting in a 150 percent power increase over the original power from the head unit’s built-in amplifier.
*** WORKS WITH ALL BLACK HARNESS ALPINE HEAD UNITS 2004 & NEWER!***
Head Unit Power Pack
Power45X4 RMS