JL Audio and Alpine. We’ve got the lines that thrill. Pick from a moderate upgrade to a heart-stopping, thunderous bass system.
You will find amps in all categories and sound levels to fit your needs. So, go ahead and crank it up at Sounds Good To Me.
250/1 Class D Monoblock Subwoofer Amplifier
• 250 W RMS @ 1.5 ohm-4 ohm (11V-14.5V)
• 2-channel (pass through, LP or HP)
• 1 pair of inputs
500/1 Class D Monoblock Subwoofer Amplifier
• 500 W RMS @ 1.5 ohm - 4 ohm (11V-14.5V)
• 2-channel (independent active filter, parallel with amp filter or pass through)
• 1 pair of inputs
1000/1 Class D Monoblock Subwoofer Amplifier
• 1000 W RMS @ 1.5 ohm - 4 ohm (11V-14.5V)
• 2-channel (independent active filter, parallel with amplifier filter or pass through)
• 1 pair of inputs
300/4 Class A/B Four-Channel Full-Range Amplifier
• 4 Channel Mode - 75 W RMS x 4 @ 1.5 ohm-4 ohm (11V-14.5V)
• 2 Channel Mode - 150 W RMS x 2 @ 3 ohm-8 ohm (11V-14.5V)
• Fully-variable (50 Hz - 5 kHz), selectable-slope / mode (12 or 24 dB / octave, LP or HP) for each pair of channels
• 2 pair of inputs
e6450 Class A/B Six-Channel System Amplifier
• Stereo- 45W RMS x 6 @ 4 ohm /
75W RMS x 6 @ 2 ohm
• Bridged - 90W RMS x 3 @ 8 ohm /
150W RMS x 3 @ 4 ohm
• State-variable, 12dB / octave Butterworth with continuously variable cutoff frequency selection from 50 – 200 Hz. Configurable as Low-Pass or High-Pass
• RCA jack inputs (low-level) and multi-pin jack (high-level)
e4300 Class A/B Four-Channel System Amplifier
• Stereo- 45W RMS x 4 @ 4 ohm /
75W RMS x 4 @ 2 ohm
• Bridged -90W RMS x 2 @ 8 ohm /
150W RMS x 2 @ 4 ohm
• State-variable, 12dB / octave Butterworth with continuously variable cutoff frequency selection from 50 – 200 Hz. Configurable as Low-Pass or High-Pass
• RCA jack inputs (low-level) and multi-pin jack (high-level)
1010 West Broadway, Suite 102 | Tempe, AZ 85282 | Phone: 480.968.8543 | info@soundzgood2me.com
